shot-peening
英
美
网络 喷丸硬化; 喷丸处理; 珠击
双语例句
- Great stress relief would occur in the uniform surface residual stress introduced by shot-peening with a great stress gradient.
喷丸引入的表层残余应力均匀且梯度大，主要发生应力松弛； - The appearence of cyclic hardening/ softening depends on the virgin microstructure of materials and the shot-peening intensity.
材料喷丸后发生循环硬化或软化，取决于材料的原始组织结构以及喷丸强度。 - The ultrasonic shot-peening process is simplified as a single shot projected on a sample, and is simulated based on ANASYS/ LS-DYNA software.
将超声喷丸过程简化为单个丸粒撞击试件的模型，应用ANASYS/LS-DYNA软件对过程进行有限元仿真。 - Experimental results indicated that the effect of shot-peening and ion implantation on the S-N curves is related to temperature.
结果表明，喷丸和离子注入对材料疲劳S-N曲线的影响与实验温度有关。 - Function relation about elasticity deformation and energy absorbed by plate in the course of shot-peening process is established in the paper.
工作面支承压力分布对于煤岩体中应力集中和弹性变形能储存起着重要作用，因而会对冲击地压的发生产生重要影响。 - Effect to the Capability of Anti-abrasion for the Hydraulic Turbine by Controlled Shot-Peening
可控喷丸对水轮机抗泥沙磨损性能的影响 - The material factors influencing the shot-peening effect for structure steels
影响结构钢喷丸强化效果的材质因素 - The fatigue limit of Ti-Ni SMA spring could be efficiently increased by shot-peening.
喷丸处理可有效提高该弹簧的疲劳寿命。 - The Failure-analyses of Shot-Blaster Bladers of High-chromium Cast Iron Used for Controlled Shot-peening
喷丸强化用高铬铸铁抛丸机叶片失效分析 - The choice of liquid shot-peening parameter and the application to strengthen the part surface.
介绍了液体喷丸技术中参数的选择及在汽轮机零件表面强化中的应用。 - Presents the flow, the components of plating liquid and the parameters of master working procedures for renovating undercarriage by shot-peening and brush-plating detailedly.
详细给出了起落架喷丸-电刷镀复合修复工艺的流程、镀液配方和主要工序工艺参数。 - The Effect of Shot-Peening on SCC Resistance of Steam Generator Heat-Transfer Tube Material
喷丸处理对蒸汽发生器传热管材料抗应力腐蚀性能的影响 - Changes of ADI Bearing Shock Load of shot-peening
奥贝球铁承受抛丸冲击载荷时的变化 - Effect of shot-peening on fatigue behavior of compressive coil springs of stainless steel
喷丸强化对不锈钢弹簧疲劳性能的影响 - This paper describes the effect of shot-peening on fatigue strength of compressive coll springs of stainless steel.
本文介绍喷丸强化对不锈钢压缩弹簧疲劳强度的影响。 - The main reason for wheel tread peeling is pointed out. The application examples of shot-peening strengthening technic and rolling strengthening technic are presented, and the obvious functions of them for enhancing parts's fatigue strength are presented also.
概述了形成机车车轮踏面剥离的主要原因，介绍了喷丸强化技术和滚压强化技术的应用实例及其对提高机器零件疲劳强度的显著作用。 - Shot-Peening for Preventing From Corrosion of Aircraft Seat Track
喷丸强化用于飞机座椅轨道防腐 - The Effective Factor and Application for Liquid Shot-peening for Turbine Part
液体喷丸效果的影响因素及应用 - Induction hardening with forced shot-peening;
感应加热淬火，加以强力喷丸； - The results show that the impact fatigue life-time of the specimen will increase by means of high-temperature temper and shot-peening after EDM with the water-base working fluid.
结果表明，采用水基工作液电火花加工，电火花加工后高温回火处理及喷丸强化等措施，都可提高试样的冲击疲劳寿命。 - The microstructure in shot-peening surface plastic straining layer of several softening and hardening materials are investigated.
研究了软化和硬化材料表面喷丸应变层内的组织结构。 - Composite Technics of Shot-peening and Brush-plating for Renovating Gears on Helicopter
直升机齿轮喷丸-电刷镀复合修复工艺研究 - Theoretical modified models which describe the effect of the external load and the shot-peening treatment on the surface oxidation are established. The prediction models are in good agreement with the experimental results.
建立了外载荷、喷丸处理对表面氧化影响的理论修正模型，模型预测与实验结果吻合较好。