slitter

英 [ˈslɪtə] 美 [ˈslɪtər]

网络  切割器; 纵断器; 分条机; 薄膜分切机; 分切机

医学

双语例句

  1. Hardware configuration and control principle of electronic control system of the important finishing equipment-1700mm slitter were analyzed in this article.
    对重要的精整设备1700纵切的电气控制系统的控制原理和硬件配置进行了分析。
  2. The scrapped rubber and slitter edge will be sold to regenerative plant and will not be used on our products any more.
    报废的橡胶和橡胶废边处理给再生胶厂，不再使用到本公司产品中。
  3. How many sheets could a sheet slitter slit if a sheet slitter could slit sheets? automatic cutting and creasing press with automatic feeder
    如果裁纸机能裁纸的话，一个裁纸机能裁多少张纸呢？自动给纸的切纸压折机
  4. XHFY series slitter and creasing machine is suitable for slitting, edge cutting, creasing of kinds of corrugated board.
    本机型适用于纸箱生产厂各种规格的瓦楞纸板分纸、切边、压痕一次成型。
  5. This paper analyzed the theory and application of GOEBEL slitter system, and studied some special control methods and characteristics.
    对GOEBEL系统的原理及应用进行了分析，研究了几种特殊控制方式并介绍了其特点。
  6. The application and design of the vector inverter for the slitter based on Inovace inverter are described.
    介绍了基于无速度传感器的矢量变频器在分切机设备上的应用方案及调试时应注意的问题。
  7. How many sheets could a sheet slitter slit if a sheet slitter could slit sheets?
    一部切纸机能够切很多张纸，如果一部切纸机能切多少片纸？
  8. PID Control Based on RBF Neural Network and Its Application in Slitter
    RBF神经网络PID控制在分切机中的应用
  9. The Structure and Design of High Speed Bobbin Slitter Paper Kites Evenness of paper sheet Acme Disk
    高速盘纸分切机的结构与设计
  10. Design of Tension Control System for Heavy Gauge Foil Slitter
    厚箔分切机张力控制系统的设计
  11. The Application of Steel Strip Centre Control Theory in Slitter Mill
    钢带中心控制理论在纵剪生产线上的应用
  12. The Design of Slitter of Soldering Aluminium Foil
    钎焊箔分切机组的设计
  13. Software developed using Visual C++ is easy of operation with a friendly and convenient user interface, in which functions as optimum cutting, surplus materials management, standard slitter knife parameters query, stocks and pieces 'data management are involved.
    利用Visualc++开发的系统性能稳定，用户界面友好，基本实现了优化下料、余料管理、下料原始数据和刀口数据管理等功能。
  14. Some Problems of the Design for Slitter
    纵剪机设计中一些问题的探讨
  15. New control system for aluminium foil slitter line
    新型铝箔纵切生产线控制系统
  16. Application of Field Bus in the Slitter Equipment of the Winder
    现场总线在纸厂复卷机纵切刀控制中的应用
  17. Analysis about the Main Problem of Electrical Control System Design of Foil Separater and Slitter
    铝箔分切机剪切机电控系统设计中主要问题的分析
  18. The result from the operation of slitting the strip for 7-8mm heavy welded pipes for automobile drive shaft and oil pump shows that proper adjustment of the slitter knives gaps in both horizontal and vertical directions will bring about satisfactory strip edge, which means much better welding quality.
    剪切壁厚7～8mm的汽车传动轴管和抽油泵管用带钢的实践表明，合理调整纵剪机上下刀片的水平间隙和垂直间隙，可获得理想的带钢边缘状态，其焊接质量明显提高。
  19. In order to maintain high quality of the products and stability of the production in strip steel slitter line system, the tension between main stand and rolling stand must be kept stable required by rolling technique.
    在带钢的纵剪生产线中，为了保证产品质量和生产过程的稳定，轧制工艺要求主机架与开卷机架和卷取机架间应保持稳定的张力。
  20. The application of Siemens network technology to stainless steel slitter line
    西门子网络技术在不锈钢纵剪线中的应用
  21. Automatic slitter scorer is the key equipment of corrugated board production line.
    自动分压机是瓦楞纸板生产线上的关键设备。
  22. By using the field bus therefore quick and accurate positioning of the slitter can be realized the drive equipment, the detector and control unit of the slitter are connected with the INTERBUS. This new system will finally increase the efficiency of the rewinder.
    本文通过引入现场总线，将控制纵切刀的驱动装置、检测系统、控制单元以INTERBUS的总线形式连在一起，可以对纵切装置进行快速而准确的定位，最终提高了复卷机的工作效率。
  23. PLC Based Self-adaptive Tension Control System Used for Unwinder of Polyester Film Slitter
    基于PLC的聚酯薄膜分切机放卷机张力自适应控制系统
  24. Designed and made to meet the requirement for strip steel slitting as part of the welded tube manufacture process, the small slitter line is both cost-saving and practical.
    根据焊管生产纵剪窄钢卷的需要，设计制造的小型圆盘刀纵剪机组价廉实用。
  25. Drive Control Based on GOEBEL Slitter
    基于GOEBEL的分切传动控制
  26. Tension Control for Film Slitter
    薄膜分切机的张力控制
  27. The paper introduces the work principle of hydraulic System for TK Slitter of Model NS, and analyses the control feature of the Hydraulic System.
    介绍NS式TK铝箔厚剪机液压系统的工作原理，分析该机列液压系统的控制特点。
  28. The Application of PLC in the Slitter Winder's Tension Control
    可编程序控制器在复卷机开卷恒张力控制中的应用
  29. Design of small Slitter
    小型圆盘刀纵剪机组的设计
  30. Automatic Control System for High-speed Slitter
    高速分切机的自动控制系统
点击展开全文

考试分类

行业分类

柯林斯词典词频分级词汇

其他分类