tappet

1. Tappet oil gallery rising-stem double-disk parallel slide valve
   （气门）挺杆润滑油道明杆平行式双闸滑阀
2. Inner lift arm and tappet assembly
   内提升臂及挺杆总成
3. Valve Tappet Adjustment For Three And Five& Cylinder Engines
   三缸与五缸内燃机气门间隙调整方法
4. The factory is Tappet car engine and hydraulic piston pin the specialized production enterprises.
   本厂是汽车发动机液压挺杆和活塞销的专业化生产企业。
5. The valve tappet guide must be replaced if it displays irregularities deviating from the limit sample photo.
   如果气门挺杆导向轴套上有明显偏离极限样本照片的缺陷，则须更换。
6. In order to deeply comprehend the wear regularity of chilled alloy cast iron tappet, the influence of surface layer microstructure on wear resistance was studied.
   为了深入了解冷激合金铸铁气门挺杆的磨损规律，研究了冷激合金铸铁气门挺杆表层组织对耐磨性的影响。
7. Hydraulic Valve Tappet Removal/ Installation Tool
   液压阀推杆拆卸/安装工具
8. If you see any sign of wear, replace the affected hydraulic tappet.
   如果看到任何磨损迹象，则请更换受影响的液压挺杆。
9. Lift the ram and position the tappet ( with the ball bearing) inside the tester cup.
   举起压头，在测试杯中定位挺杆（带滚珠轴承）。
10. The utility model discloses a combined hard alloy tappet which includes a tappet body whose one end surface is provided with a concave platform inside which is connected with a hard alloy slice.
    本实用新型公开了一种组合式硬质合金挺柱，包括挺柱本体，在所述的挺柱本体的一端面设有凹台，在所述的凹台内连接有硬质合金片。
11. Of course, the fundamental solution to the problem or to improve the tappet of the material and size accuracy.
    当然，根本上解决问题还是要提高挺杆的材质和尺寸精确度。
12. This guarantees a better test and the unequivocal centring of the tappet push rod of the slave cylinder in the release lever!
    这样可保证更好的测试结果以及将从动油缸的推杆绝对对准中心！
13. Computation Method of Elastohydrodynamic Lubricant Film Thickness Between Cam and Tappet of IC Engines
    内燃机凸轮挺柱间油膜厚度的计算方法
14. Make sure that theflat-based tappet guides are not damaged.
    确保不损坏平底挺杆导轨。
15. Pull each of the components out of the FLAT-BASE tappet housing using a strong magnet.
    用强力磁铁将每个部件从平底挺杆壳中拔出。
16. Slide Hydraulic Tappet Remover/ Installer Tool C-4129-A through opening in cylinder head and seat tool firmly in the head of tappet.
    将液压挺杆拆卸/安装工具C-4129-A滑入汽缸盖开口，在挺杆头内将工具安置牢固。
17. In other words, the pedal must lie on the tappet push rod.
    换言之，踏板必须位于推杆上方。
18. Experimental Investigation on Engine Cam-tappet Rotation and Its Influential Factors
    发动机挺柱转动及其影响因素的试验研究
19. Experimental Investigation in the Influence of Tappet Rotation on Anti-scuffing Property of Cam-tappet
    挺柱转动对凸轮挺柱摩擦副抗擦伤性能影响的试验研究
20. The influence of quenching temperature and holding time on graphite content, hardness and wear resistance of the chilled end of a valve tappet made of an alloy cast iron has been investigated.
    本文研究了CrMoCuP激冷合金铸铁气门挺杆热处理时淬火加热温度和保温时间对激冷白口层石墨数量、硬度和耐磨性的影响。
21. The construction of a new type anti-pitting tappet with a cast hole in its end face and isothermally treated are described.
    介绍了端面直接铸孔并进行等温处理的新型抗点蚀挺杆体的结构和热处理工艺；
22. Before design cam, the tappet displacement curve has to be design.
    在设计凸轮之前，首先进行挺柱升程曲线的设计。
23. The new technology and new structure of model AJR engine applied in Santana 2000 car is introduced, including light valve gear, camshaft, tappet friction pair, timing transmission system, lubricating system and cooling system.
    对桑塔纳2000轿车用AJR发动机从以下几个方面：轻型气门机构、凸轮轴和挺杆摩擦副、正时传动系统、润滑系统和冷却系统的新技术、新结构作了概要分析。
24. In this article the Valve tappet adjustment for three and five-cylinder of four-Cycle engines is discussed.
    本文论述四冲程三缸内燃机，五缸内燃机气门间隙的调整原理与方法。
25. Settling test is a key working procedure to ensure the functions of a hydraulic tappet.
    沉降测试是为了保证液压挺柱性能的关键工序，其偶件要求精度高，生产批量大，并且出厂必须全检。
26. On the base of the known stiffness valve and damping value of hydraulic tappet, the dynamic state responds of hydraulic tappet valve train are calculated by means of force analysis of the model.
    在已知液压挺柱刚度值和阻尼值的基础上，通过模型受力分析，编程计算出了液压挺柱配气机构的动态响应。
27. Phosphating is usually applied to the cam and tappet of engine for the inhibition of early scratch.
    为了解决发动机凸轮、挺杆早期擦伤，常对其进行磷化处理。
28. The key problem of structural design of ceramic-metal composite tappet rod is the connecting man-ner.
    陶瓷-金属复合挺柱结构设计的关键问题是连接方式。
29. Based on the calculation, after using the hydraulic tappet, the valve train not only has less vibration and noises but the cam contact stress has been improved obviously.
    经计算，使用了液压挺柱后，不仅振动和噪声减小，而且凸轮与挺柱接触应力也有明显的改善。

noun

1. a lever that is moved in order to tap something else