torques

英 [tɔːks] 美 [tɔrks]

n.  (使机器等旋转的)转矩
torque的复数



双语例句

  1. Tighten lock nut from camber eccentric to the prescribed tightening torque tightening torques for rear axle.
    将外倾角偏心装置的锁紧螺母紧固至规定的拧紧力矩后轴的拧紧力矩。
  2. The tightening sequences and step-by-step tightening torques must be observed!
    必须遵守紧固顺序和分步拧紧力矩!
  3. Torques resulting from this change are called compliance torques.
    这种变化产生的力矩称为弹性变形力矩。
  4. Only then tighten the threaded parts with the prescribed tightening torques.
    然后只将螺纹件拧紧到规定的拧紧力矩。
  5. Effects of Harmonic Torques of Asynchronous Traction Motor on Locomotive Dynamics
    异步牵引电机谐波转矩对机车动力学的影响
  6. Refer to tools and tightening torques in chapter "removing camshaft housing"!
    参阅章节“拆卸凸轮轴室”中的工具和拧紧力矩!
  7. During the past four lectures, we have dealt with angular momentum, torques and rolling objects and rotations.
    前四讲中,我们讨论过角动量,力矩滚动物体及旋转。
  8. Observe the correct tightening sequence and tightening torques.
    遵循正确的紧固顺序和拧紧力矩。
  9. Always observe specified tightening torques.
    请务必遵守规定的拧紧力矩。
  10. External torques arise from outside the system.
    外转矩是由系统外部生产的。
  11. Observe correct tightening torques tightening torques for steering-chapter on "technical values".
    请遵循正确的拧紧力矩转向装置的拧紧力矩-“技术值”章节。
  12. Study on Emulation and Experiment of the Impulse Torques Control of Two link Flexible Manipulators
    柔性双连杆机械臂脉冲力矩控制的数值仿真和实验研究
  13. Observe the different tightening torques.
    请遵循不同的拧紧力矩。
  14. The most important torques are specified at the end of the respective chapters.
    最重要的扭矩在相应章节的结尾处做了规定。
  15. Torsional microslip at the clamps results in spurious torques which act like pivot friction torques.
    夹紧处扭杆的微小滑移会产生干扰力矩,它的作用和轴颈的摩擦力矩一样。
  16. Pay attention to tightening torques tightening torques for brake hydraulic system-see section on "technical values".
    注意拧紧力矩制动液压系统的拧紧力矩-参见“技术值”部分。
  17. Replacing valve block-section on "general warning notes" observe correct tightening torques.
    更换阀组-“一般警告注释”部分请遵守正确的拧紧力矩。
  18. Angular momentum, torque, cancellation of internal torques, equations of statics.
    角动量,转矩,内转矩的消除,静力学公式。
  19. The error torques include mass unbalances, compliances, bias torque, etc.
    误差力矩包括质量不平衡,柔性,偏置力短,等等。
  20. The interaction forces that may be present among the particles of a system give rise to internal torques.
    系统内各质点间可能存在着的相互作用力,会产生内力矩。
  21. Observe tightening torques tightening torques for rear axle.
    遵守拧紧力矩后轴拧紧力矩。
  22. In manual designs, the driver shifts the gears to deliver different torques.
    手排变速箱设计由驾驶人变换档位,提供大小不同的扭力。
  23. Sum of all torques is zero, 0 if it's like this, sum of all forces is zero.
    力矩之和为,如果是这样,所有力之和为。
  24. There will be stray torques from the leads to the detector and some frictional forces from the bearings.
    接到探测器的导线和一些轴承摩擦力会产生杂散力矩。
  25. Sum of all forces is zero, 0 sum of all torques is zero.
    作用力之和为,力矩之和为。
  26. A two-wheeled coaxial inverted pendulum system was derived using the wheel motor torques as inputs and taking the nonholonomic no-slip constraints into account by Lagrange method.
    应用第一类拉格朗日方法对系统进行力学分析,建立了以电机转矩为输入且轮在轴向无滑移的非完整约束下系统的数学模型。
  27. This requires design concepts that provide thermal growth flexibility while reacting large torques, separating loads and external ducting loads.
    这就要求设计概念,提供热增长的灵活性,同时反应,大扭矩,分离负荷和外部管道负荷。
  28. Tightening torques for brake hydraulic system.
    制动液压系统的拧紧力矩。
  29. Tightening torques for front axle, section on "trailing arm".
    前轴的拧紧力矩,“拖臂”章节。
  30. Study on disturbance torques compensation in high precise servo turntable control system
    高精确度伺服转台控制系统中的扰动力矩补偿