underlayer
英
美
n. 地层; 油画的底层颜色（层）; 下层；底层
复数：underlayers
COCA.40770
双语例句
- It should also help in the prediction of avalanche risk, because snow slips are often the result of dense snow falling on a less-dense underlayer.
该研究也可以帮助预测雪崩的风险，因为雪层的滑落通常是因为较密实的雪层覆盖在较松软雪层上的结果。 - Apply Simatic S7 PLC on Inly Underlayer Production Line
西门子S7可编程控制器在内衬层生产线上的应用 - Change Regulation between Material of Underlayer and Roadbed Strength in Frost Area
季冻区公路基垫层材料与路基强度变化规律探讨 - The result shows that when thickness of the rubber underlayer is increased, frictional coefficient is decreased.
皮下脂肪层厚度。结果表明：橡胶层厚度增大，摩擦因数有减小的趋势； - Using the underlayer, BaM thin film with c-axis orientation have been prepared.
应用这种非晶衬底层，制备了c轴垂直于膜表平面的BaM薄膜。 - Diamond-like carbon ( DLC) films with and without Ti underlayer were prepared with complex plasma arc of DC magnetic separation and pulsed cathode.
利用直流磁分离及脉冲阴极双激发源等离子弧薄膜沉积装置制备了含Ti底层和无Ti底层的类金刚石碳薄膜（DLC）； - When the hardness of plastic alloy underlayer increases, the coefficient of friction has increasing current.
塑料合金层硬度增大，摩擦系数有增大的趋势。 - From this hypothesis, all problems come down to find the hydrological response of every type of basin underlayer.
在这个假设的基础上所有的问题就归结到一点：寻找每一种下垫面的水文响应。 - Effect of Ag and Ti underlayer on the ordering in Fe/ Pt multilayers
Ag和Ti底层对[Fe/Pt]n多层膜有序化的影响 - The design of cement power-sprayed is introduced in the thesis including composite foundation bearing capacity design, the checking computations of underlayer strength and composite foundation deformation.
介绍了粉喷桩设计，即粉喷桩复合地基的承载力的设计计算，下卧层强度和复合地基变形验算，并对粉喷桩的设计思路作了归纳。 - Effect of Thickness and Hardness of Rubber Underlayer on Frictional Coefficient of Water-lubricated Integer Bearings
橡胶层厚度和硬度对水润滑整体式轴承摩擦因数的影响 - The paper analyses the treatment principles of soft foundation from the composition of it and the characteristics of the medium-and-small-sized buildings, combining with engineering practice, and expounds the shallow layer treatment about it by underlayer methods.
从软弱地基的组成情况及中小型建筑的特性入手，分析软弱地基的处理原则，结合工程实践，阐述采用垫层法进行软弱地基的浅层处理。 - Main contents and conclusion include: ( 1) Based on deformation conforming condition and static mechanics balance condition, the foundation, pile body composite foundation and vertical deformation of underlayer are researched.
基于变形协调条件和静力平衡条件，对基础、桩体复合地基，以及下卧层的竖向变形开展了系统研究。 - Compress deformation of underlayer of cement fcy-ash gravel pile composite foundation is analyzed.
对水泥粉煤灰碎石桩复合地基下卧层的压缩变形进行详细的分析。 - The role of Ti underlayer is discussed.
论述了Ti底层的作用。 - The Effects of Zr Underlayer on the Microstructure and Properties of Al Films
Zr过渡层对Al膜微结构与性能的影响 - It was found that the Cr underlayer could enhance the perpendicular anisotropy and increase the coercivity of the amorphous TbCo films.
结果表明，Cr底层的存在能够增强TbCo非晶垂直磁化膜的磁各向异性，并使得其矫顽力增加。 - Settlement of the Long Pile Foundation with Soft Soil Underlayer
长桩持力层下有软弱下卧层土时的基础沉降 - Underlayer paper is the basic material for the production of antiflaming decorative board.
底层纸是生产阻燃装饰板的基本材料。 - Influence of Heat-Treatment on Mechanical and Frictional Properties of DLC Films with and without Ti Underlayer
热处理对类金刚石碳薄膜力学和摩擦性能的影响 - Pattern transfer technique is used to transfer photoresist microlens arrays into the polymer underlayer.
通过反应离子刻蚀可以将光刻胶微透镜图形转移至这种高性能的聚合物材料上。 - During filling period, total and underlayer root quantities are more 32.9% and 9.1%.
灌浆期：根量超过对照32.9%，下层根含量比对照多9.1个百分点。 - It was found that the DLC films with Ti underlayer had lower hardness and elastic modulus than those without Ti underlayer.
结果表明，同无Ti底层的DLC薄膜相比，含Ti底层的DLC薄膜的硬度和弹性模量较低； - On Productivity Forecast Technique for Carbonate Reservoir Then the separation method of the underlayer glycerin solution was explored.
碳酸盐岩储层产能预测方法探索探索了分离方法。 - Application of the SIMPLEX correct system in tyre underlayer complex-production
SIMPLEX纠偏系统在轮胎内衬层复合生产中的应用 - Natural water was used as lubrication medium, the frictional coefficient of water-lubricated integer bearings of different rubber underlayer thickness and hardness was studied by using MPV-20B model friction and wear test machine. The change rule of the frictional coefficient was found and friction mechanism was analyzed.
以自然水为润滑介质，用MPV-20B型摩擦磨损试验机分别研究了不同橡胶层厚度和硬度的水润滑整体式轴承的摩擦因数，得到了它的变化规律并对作用机理进行了分析。 - Then the separation method of the underlayer glycerin solution was explored.
探索了分离方法。 - It proves that the underlayer to compound foundation is of importance by finite element analysis and engineering examples, and the parameters for design has been put forward.
文中通过有限元分析和工程实例，证明了褥垫层对协调桩土变形的重要作用，并提出褥垫层的设计参数。 - Model Driven Architecture ( MDA) is a new framework of the software development, which aims to separate the business and application logic from the platform technology in the underlayer.
模型驱动体系架构（MDA）是一种新的软件开发框架，它的目标是把业务和应用逻辑与底层的平台技术分离。 - For interface effects, the study focused on the reaction between underlayer TiN and AlCu films as well as its effects on wafer level and package level EM results. Finally, all the achievements and innovations of the dissertation were summarized.
最后，论文探讨了氮化钛衬底与铝铜薄膜之间的反应对晶圆级和封装级电迁移可靠性的影响机制。论文的最后部分总结了全部研究工作的核心成果和创新点。