worktable

1. Worktable throw is adjustable for hot stamping of different length of work piece.
   工作台行程可调，方便烫印不同长度的工件；
2. Design and Control Technique of the Planar Worktable for Grinding Wheel Shaping Machine
   砂轮修形机二维工作台设计及其控制系统研究
3. Static and dynamic analyses were made for the virtual-axial worktable.
   对虚拟轴工作台并联机构做了静力分析和动力分析。
4. Fasten the pulley and the support block to your worktable.
   拴紧对你的工作台的滑车和支承区块。
5. After optimization, the worktable mass is decreased significantly, which shows the effectiveness of CSD approach.
   优化后工作台质量明显减小，表明了并行子空间设计方法的有效性。
6. After being positioned and locked by the worktable, the work-piece will enter the broaching state.
   经过工作台定位、锁紧，工件进入拉削状态。
7. The airproof device under the worktable has wonderful crumbs-clearing effect.
   工作台下具有锯片密封装置，排屑效果好；
8. Worktable height can be adjusted freely.
   工作台高度可灵活调整。
9. After work, move the worktable to the center, shut off general supply and do the clean work.
   工作完毕，应将工作台移至中心，切断总电源，做好清洁工作。
10. Adopt disk worktable is equipped with six set dies.
    圆盘式工作台，六个工作位置，可以安装六套模具。
11. To do this, the database engine must create a worktable to store intermediate results.
    为此，数据库引擎必须创建一个工作表来存储中间结果。
12. Friction Identification and Compensation in an AC Servo Worktable Based on Torsion Measuring
    基于力矩测量的交流伺服工作台摩擦识别与补偿控制
13. A strong worktable is a definitive must.
    一个坚固的工作台是必须的。
14. Micro-Displacement and Rotation Measurement Method of Precision Worktable Based on Radon Transformation
    一种基于Radon变换的精密工作台微位移和转动测量方法
15. The vertical worktable is connected to a vertical and a horizontal guide rail and a grating ruler support plate respectively.
    纵向工作台分别连纵向、横向导轨和光栅尺托板；
16. However, grinding machines with vertical spindles can have either a planer type table like that of the horizontal-spindle machine or a rotating worktable.
    而立式主轴磨床既可以像卧式主轴磨床那样具有刨床式工作台也可以具有旋转工作台。
17. Research on Feed Control Technology of Air Bearing Worktable Based on Linear Motor
    基于直线电机的气浮工作台进给控制技术研究
18. An AC variable frequency drive and PLC-control system for the worktable of light-duty double housing planer of BQ2010 was designed.
    设计了适用于BQ2010轻型龙门刨床工作台的交流变频拖动及其PLC控制系统。
19. A new type design of welding worktable for cone-shaped mask and belt
    一种新型锥形口罩耳带焊接工作台的设计
20. Two-dimension worktable as controlled plant moves in axis_X and axis_Y direction synchronously through step motor driving ball bearing.
    二维工作台作为被控对象通过步进电机驱动滚珠丝杆在X/Y轴方向联动。
21. This subject is about thermal deformation error detection and compensation of an YKX3132G six axes CNC gear-hobber machine's worktable in X axis direction.
    本课题针对在KX3132G型六轴数控滚齿机床加工过程中，工作台热致变形产生的X轴方向上的误差进行测量与补偿。
22. The rolling worktable is designed specially for processing glass& stone.
    机器专门为玻璃、石材设计的滚轮平台、方便上下材料。
23. Research on fuzzy-PID-based control method for ultra-precision worktable
    超精密工作台的模糊PID复合控制研究
24. Design and simulation of a 3-DOF micro-positioning worktable
    三自由度精密定位工作台的设计与仿真
25. This paper studies a kind of two-coordinate worktable which is the impo.
    本论文研究的二维定位平台为一种新型纳米三坐标测量机的重要部件。
26. At this time, the sensor, cannot worktable to close the switch.
    此时，工作台的感应片，不能对着接近开关。
27. Fast marking on a cylinder is also available with the help of a special rotary worktable for laser beam.
    配合激光的专用旋转工作台，可以实现快速柱面打标加工。
28. Vacuum worktable can be fine adjusted for location.
    真空工作台，定位可微调。
29. Worktable use2 grades gearbox and frequency conversion stepless speed regulation.
    工作台采用二级变速箱，用变频无级调速。
30. The milling cutter and the guide wheel are sleeve-jointed in sequence on a motor output shaft, the motor output shaft is vertical to the workpiece transmission direction of the worktable;
    所述的铣刀和导轮依次套接在电机输出轴上，电机输出轴与工作台的工件送入方向相垂直；

noun

1. a table designed for a particular task

   Synonym:    work table