zero-pole
英 [ˈzɪərəʊ pəʊl]
美 [ˈzɪroʊ poʊl]
网络 零极点模块; 零极点传递函数模块
双语例句
- The other methods include: The conventional method of spectrogram parameters, the zero-pole model and the fractal method, the latter two were proposed by the present authors before.
这些方法包括：传统的声谱参数法及以前提出的零极点模型法及分形分析法。 - To resolve the PID control problem of unknown systems, intelligent PID controller of zero-pole placement was designed according to PID control system theory and zero-pole placement theory.
为解决未知系统的PID控制问题，根据PID控制及零极点配置控制理论，详细讨论了零极点配置PID控制器、智能PID控制器的构成过程。 - According to the character of MDSLS, a new controller is developed which is based on ITAE combined with invariance theory and zero-pole placement.
提出了一种用于电动伺服加载系统的控制器设计新方法，该方法主要基于ITAE最优控制理论，并结合了不变性原理及零极点配置理论。 - Zero-pole Point Identification Based On Genetic Algorithm
遗传算法在零极点辩识中的应用 - This paper analyzes key techniques of digital nuclear pulse processing. With MATLAB software, main algorithms are simulated, such as trapezoidal shaping, digital baseline estimation, digital pole-zero/ zero-pole compensation, poles and zeros identification.
文章分析了数字核脉冲处理关键技术，利用MATLAB完成了梯形成形、数字基线估计、数字极零零极补偿、极零点识别等核心算法的模拟。 - Through analyzing influence of the location of zero-pole points on the dynamic characteristic, the paper designs the dynamic compensation units by re-disposing zero-pole points.
并通过理论上分析零极点对系统动态特性的影响，研究了利用重新配置零极点来改善系统动态特性的方法。 - Zero-Pole Method for Frequency Amplitude-phase Characteristic Calculation
频域计算的零极点法 - Application of zero-pole match method in electrohydraulic position servo system
零极点匹配法在电液位置伺服系统中的应用 - Dynamic compensator for the accelerometers was set up to improve the navigation precision of non-gyro inertial measurement unit ( NGIMU) by using the zero-pole assignment, based on the proposed 9-accelerometer.
基于提出的一种无陀螺惯性测量组合（NGIMU）九加速度计配置方案，采用零极点配置的方法设计动态补偿器对加速度计进行动态补偿。 - The Zero-Pole Substructure Analysis of Linear Multivariable Systems
多变量系统传递函数阵零极点的子结构特征分析 - To solve the problem of excessively big parameter value in the conventional LQG/ LTR controller, a design method was proposed for non-fully recover LQG/ LTR. The principle for reducing the controller parameter value was explained from the perspective of system's zero-pole relationship.
为解决常规LQG/LTR控制器中存在的参数值过大问题，提出了非完全恢复的LQG/LTR设计方法，并从控制系统中零极点关系的角度，阐述了该设计方法降低控制器参数数值的机理。 - This paper investigates the cascade synthesis of the lossless network double-end loaded with resistance. The concept of zero-pole distributive chart of the input impedance is defined.
在研究两端电阻负载无损网络的链联综合的基础上，文中引进了输入阻抗的零极点分布图的概念，使用这一概念给出了A。 - The properties of a nonlinear transfer function are studied. The new ideas of nth-order. stability, nth-order zero-pole point, nth-order frequency response and nth-order sensitivity as well as a new theory and implementation on sensitivity of nonlinear circuits and systems are proposed.
本文研究了非线性传递函数的性质，提出了n阶稳定性、n阶零极点，n阶频率响应、n阶零灵敏度等新概念和非线性系统灵敏度分析的新理论和方法。 - A Systems zero-pole Correction based on state space method
基于状态空间方法的系统零极点校正 - A Direct Zero-Pole Assignment Controller
一种直接零极点配置控制器 - The zero-pole point distribution and the dynamic performance and the transient response of the DD-1 and DK-1 seismograph systems
DD1和DK1地震仪系统的零极点分布、动态特性与暂态响应 - In this paper, we design the IMC controller using zero-pole cancellation method, and tune the feedforward filter parameter and the gain parameter K using fuzzy inference method.
本文采用相消法设计内模控制器，同时在线模糊调节前馈滤波器的时间常数β和增益参数K。 - Using Zero-pole Method to Research the Frequency Response of Resonance Circuit
基于零极点分析法的谐振电路的频率响应研究 - Zero-pole analysis method for audio Doppler signal in medical ultrasound
医学超声中音频多普勒信号的零极点分析法 - In view of the disadvantages of zero-pole matching dynamic compensation method, the dynamic compensation method of tilting train measurement system based on non-linear neural network is put forward.
针对零极点匹配动态补偿方法的不足，提出基于非线性神经网络的摆式列车检测系统动态补偿方法。 - Accordingly with zero-pole matching method, corresponding digital filters for dynamic compensation are designed, and dynamic compensation method based on neural network is also studied and corresponding dynamic compensation networks are designed.
然后在此基础上，采用零极点匹配法设计了相应的动态补偿数字滤波器，并对基于神经网络的动态补偿方法进行了研究，设计了相应的神经网络动态补偿器。 - For avoiding the zero-pole cancellation between controller and target by solving the Riccati equation, PS/ T sensitivity design method is introduced.
首先，将PS/T灵敏度设计方法引入控制器设计，解决了基于Riccati方程法在设计过程中的零极点对消问题。 - Based on the principle of the Zero-Pole assignment controller, this thesis makes the research on designing the Electro-magnetic gear control system aimed at the controlled object-the Electro-magnetic gear transmission system, and makes recognition of the parameters.
基于零极点配置自校正控制器原理，针对被控对象&电磁齿轮传动系统研究设计了电磁齿轮控制系统，并对其参数进行辨识。 - The complex state signal flow graph is used for modeling the PWM conversion part. With the analysis of zero-pole graph of the current control inner loop, a novel complex state current regulator is proposed.
利用复矢量信号流图对PWM变换环节进行建模，在对电流内环控制系统零极点图分析的基础上，提出了一种新颖的复矢量电流调节器。 - By the conventional internal model control method for internal model control design to the intelligent development of internal model control method, more typical of the conventional design methods, such as two-step method, zero-pole cancellation method, predictive control law.
内模控制已由常规内模控制设计方法向智能内模控制方法发展，较典型的常规设计方法如两步法、零极点对消法、预测控制法等。