cladding

noun

1. 镀层；保护层
   a covering of a hard material, used as protection

1. N-UNCOUNT (建筑物外壁的)覆层;室外装饰
   Cladding is a covering of tiles, wooden boards, or other material that is fixed to the outside of a building to protect it against bad weather or to make it look more attractive.
   1. ...stone cladding.
      石头覆层
2. (核反应堆中燃料棒外的)金属涂层，镀层
   Cladding is a layer of metal which is put round fuel rods in a nuclear reactor.

1. The light travels in a composite medium made up of the film, the substrate and the cladding.
   光在由薄膜，衬底和覆盖层组成的混合介质中传输。
2. Microstructure and Properties of Laser Cladding Wear-resistant Self-lubrication Composite Coatings on TiAl Alloy;
   再以此为基体制得高自润滑性和高抗磨性的聚甲醛共混合金复合材料。
3. Effect of Laser Cladding Processing Parameters on Microstructure and Properties of Cladding Layer
   激光熔覆工艺参数对熔覆层组织和性能的影响
4. The application of laser cladding in the precise repairing of plastic moulds were prospected also.
   展望了激光熔覆技术在塑料模具精密修复中的应用。
5. Microstructure and Performance of Laser Cladding on Surface of Aluminum Bronze
   铝青铜表面激光熔覆层组织与性能研究
6. Wear property and mechanism of laser cladding TiC-Ni composite coating
   激光熔覆TiC-Ni复合涂层的摩擦磨损性能和磨损机制研究
7. The deposited ferritic weld metal shall not contact the austenitic or high-chromium steel cladding.
   熔敷的铁素体焊缝金属不应与奥氏体或高铬钢复层接触。
8. And we'll also be putting the fuel pins in the same zircaloy cladding tubes.
   我们也放入了燃料大头针，在同样的锆合金的管子里。
9. The effect of coating on anti corrosion has been studied, which is formed by laser cladding and plasma spurt welding on metal base of anti acid stainless steel.
   研究了在耐酸不锈钢基体上采用激光熔覆和等离子喷焊两种工艺形成的涂层对耐腐蚀性的影响。
10. It improved the measuring precision of the thickness of rocket motor cladding.
    提高了火箭发动机包覆层厚度测量精度。
11. From the results, t may open up a new way to the application of laser cladding technology.
    该结果为激光熔覆技术的应用开辟了新的道路。
12. Research progresses of nano-composite coating prepared by laser cladding are reviewed in brief.
    综述了激光熔覆制备纳米结构复合涂层的研究进展。
13. Analysis of the microstructure, mechanical and corrosion distribution of the different output power of laser cladding.
    对不同输出功率下得到的熔覆层微观组织和力学及腐蚀性能进行了表征。
14. The characteristics of laser cladding and laser remanufacturing technology are introduced.
    介绍了激光熔覆技术和激光再制造技术的特点。
15. The features and microstructure of the cladding layer and interface layer between cladding layer and copper substrate were analyzed.
    对熔覆层和熔覆层与基体结合区的形貌和微观组织进行了研究。
16. A new technology which called laser micro cladding technology was presented.
    本文引入了一种厚膜电路制造的新技术&激光微熔覆技术。
17. Modeling and Numerical Simulation on Laser Remelting and Cladding capable of being melted and fused.
    激光熔凝和激光熔覆的数学模型及数值分析可以被熔化或熔融的。
18. The nozzles are satisfactory for powder feeding in laser cladding and can be used for material synthesis of powders.
    孔式同轴送粉系统较好地满足了激光熔覆对送粉喷嘴的要求，并且能用用来进行多种元素粉末的材料合成。
19. As you can see here swelling and rupture of cladding, that you have to look at.
    如你们在这看到的，这是覆盖层的膨胀和断裂，你们必须要观察的。
20. Study on Microstructure and Performance of Ni-SiC Cladding by Argon Arc Cladding
    氩弧熔覆Ni-SiC熔覆层组织与性能研究
21. In laser cladding, the movement of the metal powder particles influences the cladding results directly.
    在激光熔覆中，金属粉末粒子的运动情况直接影响熔覆的效果。
22. The effects of rolling and annealing temperatures on the shear strength of titanium cladding steel plate were investigated.
    研究轧制温度、退火温度对复合板剪切强度的影响。
23. In this paper, the composition technics and technical requirement of cladding additives of ammonium nitrate are studied.
    文章主要对包覆硝酸铵所选用材料的复合工艺及技术要求等进行研究。
24. The scrap mould were repaired by laser cladding technology with self-made alloying powder.
    采用自配的合金粉末，利用激光熔覆技术，对报废锻压模具进行了修复；
25. The Fe-based wear-resistant layer was melted on the surface of low-carbon steel by high-frequency induction cladding.
    采用高频感应加热熔覆方法在低碳钢基体上制备了铁基合金涂层；
26. The preparation of ternary boride hard alloy cladding layer on steel substrate is studied.
    研究采用铸渗法制备三元硼化物硬质合金覆层钢基材料。
27. Laser cladding on metal surface is a new surface modifying technique developed in recent years.
    金属表面激光熔覆技术是近年来发展起来的一种新型表面处理工艺。
28. The optimism design of thickness for this cladding material is helpful to improve the performance of thermal shock resistance.
    对硬质覆层材料的厚度进行优化设计有助于其抗热震性能的提高。
29. The repair of ventilator axle journal with serious wear was achieved by using the method of laser cladding.
    采用基于激光熔覆的方法实现了大磨损量的风机轴颈的修复。

noun

1. a protective covering that protects the outside of a building

   Synonym:    facing