contouring

英 [ˈkɒntʊərɪŋ] 美 [ˈkɑnˌtʊrɪŋ]

n.  外形修整;弯形(一般指型材弯曲) ;造型;外形加工
v.  画等高线(contour的现在分词)

现在分词:contouring

医学



双语例句

  1. San Diego-based plastic surgeon Dr. Barry Handler says that while skin contouring operations are common for morbidly obese people after gastric bypass surgery, they are not the best candidates for surgery.
    来自圣地亚哥的外科医生BarryHandler说虽然在做过胃分流手术之后,通常情况下都会为病怏怏的肥胖病人再进行肌肤轮廓手术,但其实这样并不好。
  2. One of the most popular procedures is facial contouring, which involves altering the shape of the face by shaving and removing bone from the cheeks, jaw and chin.
    面部重塑是最受欢迎的手术之一,这种手术通过削薄或摘除脸颊、颌部和下巴的骨头来改变脸型。
  3. Throw in some eyeliner and mascara, eyeshadow and face powder, or even the more extreme ( but very popular) face contouring, and you can look almost like an entirely different person.
    若是再画眼线,涂睫毛膏,打眼影,扑粉,甚至有点极端(但颇流行的)画点脸部轮廓线,你完全可以变成另一个人。
  4. This process to incorporating the prior models or interpretations can be implicit, poorly defined as in hand contouring;
    这种整合先验模型或解释的过程有时是隐蔽或不易察觉的,正如在手工绘等值线图中的情形;
  5. Key techniques of the body contouring by non-invasive focused ultrasound
    非侵入式超声塑形及其实现的关键技术
  6. Objective To investigate the role of face contouring of fat transplantation in facial aging correction.
    目的探讨脂肪雕塑丰面术后收到许多意外的面部皮肤改善的临床效果和原因。
  7. In addition, we discussed the principles of occlusal guidance, discrepancy of tooth morphology, anchorage control, maxillary canine contouring and clinical attention in the treatment of malocclusion.
    此外也针对以空隙关闭法在侧门齿先天缺失的成人病例中,就外观差异、咬合导引、锚定控制、犬齿型态修饰、矫正注意事项作综合性之探讨。
  8. Where padding is not desirable, contouring may be used instead.
    如果灌水是不可取的,勾边,可代替。
  9. There is some contouring to the left of the green which would make for an interesting chip shot, but it also funnels a bit of drainage over the left side of the green instead of around it.
    在果岭左边还是还是有些等高线,其会使其变成有趣的一击,但是还需要在果岭的左边做一个漏斗状排水井。
  10. There are two basic types of numerical control systems: point to point and contouring.
    数控技术系统主要有两种类型:点对点数控系统和轮廓线数控系统。
  11. A hammer and chisel are used for the first stages of contouring a surface.
    第一阶段使用锤子和凿子画大样。
  12. After previous contouring with tungsten carbide finishers the polishers can achieve brilliant high shine in a single step.
    在碳化钨硬质合金修整器塑形后,使用此抛光器可以马上获得明亮的磨光效果。
  13. Many contouring NC machines, such as lathes and vertical milling machines, are of the two-axis type. This type allows continuous-path contours to be machined only in the XY plane. vertical milling machine for working metal, numerically controlled
    许多轮廓数控机床,如车床、立式铣床等,是两轴的。这种机床只能在xy面上进行连线轮廓加工。直立式铣床,用于金属加工,数字控制式
  14. Effect of hub-shape contouring on the corner blockage of compressor stator cascade
    轮毂修型对压气机静子角区堵塞的影响
  15. And like the latter, it's a form of body contouring as opposed to weight loss.
    喜欢后者,这是一个形式的身体轮廓,而不是减重。
  16. Contouring nozzles to reduce particle lag losses does not appear to be appealing.
    为了减少颗粒滞后损失而成型的喷管是没有多大发展前途的。
  17. Contouring NC systems can direct the tool or workpiece to move at any angle, and also along curved paths.
    轮廓数控系统能将刀具或工件向任一角度,也可沿曲线轨迹移动。
  18. This paper describes a method, with which the vector form of Chinese characters can be converted to dot-matrix form, and then contouring of that can be made.
    介绍了一种先将矢量汉字转化为点阵信息,然后再对该汉字点阵进行轮廓化处理的方法。
  19. A discrete method for contouring of high order triangular elements is presented in this paper.
    该文提出一种画高次三角形单元等值线的离散方法。
  20. Optimal Contouring Control Based on Task Coordinate Frame and Its Simulation
    基于工作坐标系的最优轮廓控制及其仿真
  21. There are two basic of control systems in numerical control: point-to-point and contouring.
    在数控机床中有两种基本控制系统,分别是点对点和线性。
  22. The3D ore body surface modeling technique mainly contains contouring the mineral profiles within prospecting line, triangulating the neighbouring contours, triangulating inside single contours.
    三维矿体表面建模技术主要包括勘探线剖面矿体边界线的圈定、相邻边界线之间三角剖分和单个边界线内部三角剖分等内容。
  23. This calculation is made independently of any lighting or contouring conditions.
    这个计算是保持任何光照或造型条件的独立性。
  24. Three-Dimensional Contouring by Using Quasi-Sine Characteristic of Moire Pattern
    利用莫尔条纹的准正弦特性的三维轮廓术
  25. Numerical Study of the Effect of Endwall Contouring on the Aerodynamic Performance of an Annular Nozzle Cascade
    端壁收缩对环形叶栅气动性能影响的数值研究
  26. An increasing number of patients require body contouring procedures after massive weight loss.
    随着减重手术的不断开展,减重后需要身体塑型的患者不断增加。
  27. Comparing the difference of contouring parotid based on CT and MRI in NPC patients treated with IMRT
    鼻咽癌调强放疗根据CT和MRI勾画腮腺的比较研究
  28. "Numerical control of machines& Data format for positioning, line motion and contouring control systems"
    GB/T8870-1988机床数字控制点位、直线运动和轮廓控制系统的数据格式