nozzle

noun

1. 管口；喷嘴
   a narrow piece that is attached to the end of a pipe or tube to direct the stream of liquid, air or gas passing through

1. N-COUNT 管嘴;喷嘴
   The nozzle of a hose or pipe is a narrow piece fitted to the end to control the flow of liquid or gas.
   1. If he put his finger over the nozzle he could produce a forceful spray.
      如果他把手指按在喷嘴上，就可以产生强力的喷射。

1. Its nozzle was smeared with some kind of lubricant.
   它的喷嘴抹了某种润滑油。
2. If he put his finger over the nozzle he could produce a forceful spray.
   如果他把手指按在喷嘴上，就可以产生强力的喷射。
3. The truncated nozzle is found to have a higher thrust.
   截断的喷管具有较大的推力。
4. Each tube is in front of the collector nozzle only long enough to discharge the processed air.
   每一个管子在集气管前停留的时间，只要足以放出处理过的空气就可以了。
5. One nozzle may be plugged.
   可能有个水眼（喷嘴）堵了。
6. Input is simply a list of propellant ingredients, as well as chamber pressure and nozzle exit pressure.
   投入，简直是名单推进剂成分，以及商会的压力和喷嘴出口的压力。
7. The jet flow radiation computational method of axis-symmetry nozzle and rectangle nozzle are also discussed.
   研究了轴对称喷管和二元矩形喷管喷气流辐射的计算方法。
8. Experimental equipment had been established to research atomization characteristics of a type of pressure nozzle.
   建立了雾化实验装置，以甘油-水混合液为介质，研究了一种压力式喷嘴的雾化特性。
9. The nozzle rate controlled formula and uniformity controlling method of sand-blasting process for color PDPs is introduced and studied.
   研究和引入了彩色PDP的喷砂工艺均匀性控制方法和喷头速率控制公式。
10. With the proposed approach, a flat fan nozzle was designed and its spray effect accords with the demands.
    使用该方法对一个喷嘴进行了设计，实际使用中喷洒效果符合要求。
11. The experiment on the matching between a variable nozzle turbocharger ( VNT) and CA498Z diesel engine is performed.
    在CA498Z柴油机上进行了可变喷嘴增压器（VNT）的匹配试验研究。
12. Thus the gas flow rate, nozzle inner and outer diameter are important influential factors on bubble size.
    气体流量和管口内外径都是影响气泡尺寸的重要因素；
13. To achieve the low superheat casting, a kind of cooling nozzle is developed.
    为实现低过热度浇注，开发了一种冷却水口。
14. The operation performance of an aero engine fuel nozzle was tested and investigated.
    本文对某型航空发动机燃油喷嘴的工作特性和雾化质量进行了试验研究。
15. Provide tangential nozzle design for level nozzles on the liquid sump.
    在液体排污箱上水平的接管提供切线方向接管设计。
16. This engine consists of an inlet, a combustor, and a nozzle.
    这台发动机由一个进气道，一个燃烧室和一个尾喷管组成。
17. The article explores swirling abrasive water jet from angles of nozzle wear mechanism and drilling.
    本论文从喷嘴磨损机理和钻孔效果两大部分对旋转磨料射流进行了探索性的研究。
18. Special designed heat Exchanger, most effective hot air circulation system and unique Nozzle make high efficiency of drying.
    专门设计的热交换器，高效的热风循环系统和独特的喷风咀，获得高效的烘燥。
19. Effect of Submerged Entry Nozzle ( SEN) argon blowing on slab quality has been investigated stimulatingly and experimentally.
    本文以连铸板坯机为研究对象，研究探讨了浸入式水口吹氩工艺对铸坯质量的影响。
20. As well, the nozzle and pressure bulkhead are designed for reduced weight.
    同时，喷嘴和压力舱壁的设计，减少了重量。
21. Material and Nozzle Diameter's Effects on Porous Media Micro Combustion
    材料和喷口直径对多孔介质微燃烧的影响
22. Please specify both required suction vacuum and full load capacity or required bypass nozzle diameter.
    请指定所需的真空吸力和满负荷的能力，或绕开喷嘴直径。
23. Based on this condition, number of nozzles and nozzle size are determined.
    在以上条件的基础上我们可以计算出喷咀的数量和大小。
24. The experimental investigation of the operational characteristics of fuel nozzle for a heavy gas turbine was performed.
    对某重型燃气轮机燃料喷嘴的工作特性进行了试验研究。
25. The ramjet performance is calculated and compared with fixed and continuous adjustable structure intake and nozzle in this paper.
    本研究对具有固定、连续可调进气道和尾喷管的冲压发动机性能进行了计算和比较。
26. The feasibility of counterflow scheme is validated by research on the internal aerodynamic characteristics of nozzle using numerical simulation.
    利用数值模拟的方法，通过对逆流方案中喷管气动性能的研究验证了逆流推力矢量方案的可行性。
27. The experimental study on atomization characteristics of nozzle is carried out with the glue as the working substance.
    以黏胶剂为工作介质，对旋芯喷嘴的雾化特性进行了研究。
28. Mechanism of axisymmetric vectoring exhaust nozzle ( AVEN) is analyzed in the view of elastodynamic capabilities.
    对轴对称矢量喷管机构进行了弹性动力学分析。
29. Combination simulation method with SEM technology, erosion mechanisms of BAT nozzle is researched.
    结合仿真技术和扫描电镜技术，分析了BAT喷嘴的冲蚀机理。
30. In diesel premixed combustion mode, the effects of nozzle cone angle on emissions were studied.
    进行了在柴油可控预混压燃燃烧模式下，油嘴喷射锥角对燃烧与排放的影响研究。

noun

1. a projecting spout from which a fluid is discharged

   Synonym:    nose

2. informal terms for the nose

   Synonym:    beakhonkerhootersnootsnoutschnozzleschnoz