outgassing

v.  除气;释气;放气;漏气
outgas的现在分词

现在分词:outgassing

电力



双语例句

  1. This paper introduces the application of testing devices for studying the contamination effect of outgassing, particulate, photodissociation for Midcourse Space Experiment satellite of USA in orbit.
    文章介绍了美国弹道中段试验卫星在轨研究放气、粒子、光化学等污染影响所用的测试装置及其测试方法。
  2. In this paper, outgassing characteristics of six key internal material are tested, and the main contaminants are water, hydrocarbon, phthalate and so on.
    长寿命制冷机性能退化的主要原因之一是内部工质污染,了解所用材料的出气特性至关重要。
  3. The rational outgassing time was determined by testing the gas compositions of different pouches in the course of storage, and the best garlic sprouts was chosen from these pouches.
    以普通聚乙烯袋做对照,通过对贮藏过程中各袋内气体组成的测定,确定了合理的放风时间,并从中筛选出一种最佳的蒜苔气调保鲜。
  4. It's used to measure Collected Volatile Condensable Materials ( CVCM) in a simulated space vacuum environment and will give out all the CVCM data of the entire outgassing measuring process.
    设备可原位、连续、定量测试星用非金属材料出气可凝挥发物率,给出全过程的出气数据。
  5. Various methods to measure outgassing rate were summarized including the pressure rising rate collecting, weighing and gas flowrate.
    总结了材料放气测试的各种方法:压力上升率法、收集法、称重法和气体流量法。
  6. The pressure and outgassing composition of the vacuum chamber were detected by vacuum gauge and quadruple mass spectrometer ( QMS).
    通过真空计和四极质谱仪分别对样品室和主真空室的全压、分压和出气成分进行监测,获得被测材料的出气率和出气成分等真空性能参数。
  7. In this paper, two concepts& spacecraft materials outgassing acceleration test and acceleration factor are described.
    阐述了空间材料出气加速测试的概念、出气加速系数的定义;
  8. Non metal materials outgassing characteristic time constants
    非金属材料出气凝结特征时间常数分析
  9. Material Outgassing Amount and Thermal Conduction in Vacuum Thermal Test
    真空热试验中材料放气的放气量及其导热问题
  10. With vacuum outgassing taken into acount, the equivalent conductivity of annulus is analyzed in detail.
    并在考虑材料真空放气的情况下,计算了管套的当量导热系数。
  11. By way of simulating the test of outgassing rates in vacuum pressure impregnation technology of capacitor, the features of pumping of vacuum system limited by low conduction is discussed.
    本文通过模拟电容器真空压力浸渍工艺放气实验,探讨了真空系统抽气性能受流导限制的特点。
  12. Study on the Outgassing Character of Material under Gas Atmosphere
    气相下材料真空放气性能的理论研究
  13. The analysis method of nonmetal material outgassing ingredients and contaminative optical testing
    星用非金属材料出气物成分及污染光学测试分析
  14. Ultrahigh vacuum system for measuring outgassing
    测量材料放气率的超高真空系统
  15. In such discharges, the plasma density was determined entirely by the outgassing of the limiter and-wall, and independent of the initial hydrogen pressure pA totally.
    在这类放电中,等离子体的密度由限制器和壁的出气量决定,而和初始充的氢气压强完全无关。
  16. Material outgassing is a common phenomenon in vacuum thermal test. In this paper, the course and mechanism of material outgassing are analyzed, and two methods of calculating outgassing amount are proposed.
    材料放气是真空热试验中常见的现象,文章分析了材料放气的过程和机理,给出了计算放气量的两种方法。
  17. The larger the surface roughness of GFRP, the greater is the outgassing rate.
    试样的表面粗糙度越大,其放气速率越大。
  18. Research on Gas Absorption and Outgassing Characteristics of Constant Volume Micro-flow Calibrating Equipment
    定容式气体微流量校准装置吸放气特性研究
  19. Outgassing rates of polycrystalline Cu and Ni in vacuum at the room temperature were measured, and some new results were obtained. Experiments consisted with the theory.
    测量了多晶铜和多晶镍的常温出气率,得到了一些新的结果,实验与理论是一致的。
  20. This article introduces the theory, equipment and method, data processing and error analysis procedure of testing screen scanning outgassing.
    简介了测试扫屏放气性能的原理、装置、方法、数据处理过程与误差分析。
  21. Application of Outgassing Model of Nonmetal Materials for Satellite
    星用非金属材料出气模型的应用
  22. Thermal Outgassing of the Vacuum Pipe's TiN Coating
    真空管道TiN膜热出气率实验研究
  23. Surface Roughometer The outgassing rate of the GFRP with different surface roughness was measured under different temperature.
    采用扫描探针显微镜对试样表面粗糙度进行测量,测量了不同表面粗糙度试样在不同温度下的放气速率。
  24. Test on Outgassing Rate or Solid Mediums in Electric Insulating Materials
    电工绝缘材料中固体介质放气率的测试
  25. The techniques of contamination outgassing characteristic of spacecraft materials
    空间材料放气污染特性研究技术
  26. The outgassing characteristics of carbon nanotube and zinc oxide cathodes
    碳纳米管阴极和氧化锌阴极的放气特性研究
  27. The outgassing rate and its eguilibrium pressure are measured by the dynamic conductance method at the molecular flow condition and different temperatures for the polypropylene film. Its vacuum characteristics is discussed in this paper.
    采用动态流导法,在分子流状态和不同温度下,测量了PP膜的放气率和平衡压强并研究了其放气特性。
  28. Simultaneously the temperature time behaviours of thermal desorption of the outgassing components are measured by a high sensitivity mass spectrometer.
    高灵敏度的质谱分析监测了出气组分的温时行为。
  29. The influence of the outgassing of the material in vacuum on the cathode lifetime is analyzed.
    分析了材料的真空放气特性对阴极寿命的影响。