Short-term strategies for reversing these things include, respectively, reheating, cleaning, and the Hopfield net. 逆转这些情况的短期策略分别是重新加热、做卫生和使用Hopfield网络。
But don't forget, reheating rice can lead to food poisoning. 但不要忘记,重复加热米饭可能导致食物中毒。
Power plant reheating steam temperature process adaptive control stability; 火电厂;再热汽温系统;自适应控制;稳定性;
According to the result, the slab reheating process was optimized for productivity enhancement and energy saving. 以此为根据,优化了板坯加热工艺,达到了提高生产效率并节能减排的目的。
This paper analyses elemental composition of sliding guide on pusher-type reheating furnace, introduces the research and application of a new sliding guide material. 分析了推钢式加热炉滑块材料的元素构成,并介绍了一种新材质滑块的研究与应用情况。
The reheating furnace for rolling employs water for cooling furnace door, skied pipes and so on. 加热轧件的加热炉用水来冷却炉门和滑道管等。
Increasing the temperature and holding time of reheating, central carbon segregation can be improved a great deal. 通过提高加热炉的加热温度和时间,板坯中心偏析将得到很大程度的改善。
The Article for improving the reheating steam temperature and reducing its volatility has a certain significance. 文章对于提高再热汽温及降低其波动具有一定的指导意义。
The heat flux to slab surface of a walking beam reheating furnace is simulated. 以某轧钢厂的一座步进梁式加热炉为例,对其钢坯表面热流进行了模拟计算。
By the industrial experiment, the distribution of continuous casting billet preheating temperature is measured, and the economic load range of reheating furnace is established. 在工业生产条件下测量了铸坯加热温度分布,工业试验确定了加热炉经济负荷运行区。
Technical Innovation of Soft Water Recycling for Regenerative Reheating Furnace in Medium Plate Mill Remove water manifold and recovery hose. 中板厂蓄热式加热炉软水回收技术创新拆卸水歧管和回收软管。
Study on Online Temperature Field Simulation System of Walking Beam Slab Reheating Furnace in Jigang 济钢厚板步进加热炉在线温度场仿真系统研究
Real forecasting of slab temperature was achieved through dynamic tracking of slab position in reheating furnace at different time. 模型系统分别与一级、三级系统通信,实现了坯料在加热炉内各位置、各时间段内的动态跟踪以及温度的实时预报。
An introduction of a son of new style slide rails design for continuous rolling mill reheating furnace. 介绍了一种用于轧钢厂连续式加热炉中的新型滑轨。
Introduces the applications of regenerative combustion technology in designing the walking-beam reheating furnace for Yuzun high wire in Qinggang. 介绍了蓄热式燃烧技术在青钢钰尊高线步进梁式加热炉设计中的应用情况。
Development of Artificial Intelligence Control System and it's Application in the Heavy Plate Reheating Furnace 中厚板加热炉人工智能模拟控制系统的应用研究
The properties of homemade new type insulation material made of polycrystalline mullite fibre and its successfully application in continuous reheating furnace are discussed. 介绍了国产新型绝热材料&多晶莫来石纤维的特性及其在连续式轧钢加热炉上的成功应用,并对其节能效果进行了分析和评价。
Sequence control system design and optimizing for reheating furnace based on hybrid network 基于混合网络的加热炉顺序控制系统设计及优化
Based on the detail about the Characteristics of Regenerative combustion, by the coal of the high temperature gasifying furnace, the regenerative reheating furnace is designed. 本文在详细分析蓄热式燃烧技术的基础上,利用高温气化炉产生的煤气,对蓄热式高温炉进行了设计。
Auto-control Scheme for the Combustion System of the Regenerative Reheating Furnace 蓄热式加热炉燃烧系统自动控制方案
Application of Regenerative Burning Technology and Evaporative Cooling Technology in Walking Beam Type Reheating Furnace 蓄热式燃烧和汽化冷却技术在步进炉上的应用
Energy-saving Reformation of Vaporization Cooling System in Walking-beam Reheating Furnace 汽化冷却系统在步进梁式加热炉上的节能改造
The results show that magnetic properties can be improved by lower slab reheating temperature. 实验结果表明,采取较低的板坯加热温度可以改善CSP无取向电工钢的磁性能。
Development and application of 3D temperature field mathematic model system for slab reheating furnace 板坯加热炉三维温度场数学模型系统的开发及应用
Harden by reheating and cooling in oil. 通过重新加热并在油中冷却来使变硬。
Simulation and Analysis of Thermal Process in Reheating Furnace Using Oxygen-Enriched Combustion 采用富氧燃烧技术的加热炉内热过程模拟与分析
Analyses the calculating method of reheating capacity in air handling process in summer for high accuracy constant temperature air conditioning system and air cleaning systems. 针对高温度精度空调系统和净化空调系统,分析了夏季空调处理过程中再热量的计算方法。
Taking the model as software desktop, an off-line study on self-seeking-optimize control strategy of reheating furnace is developed. 建立了炉内金属加热过程的数学模型,并以该模型为实验手段,对冶金企业连续加热炉的自寻最优控制进行了离线仿真。