sandblasting
英 [ˈsændblɑːstɪŋ]
美 [ˈsændblæstɪŋ]
v. 喷沙(用以清污、打磨或装饰物体表面)
sandblast的现在分词
现在分词：sandblasting
COCA.45452
双语例句
- Required machines: Bending machine, Laser Cutting machine, Sandblasting facility, Welding machines.
所需机器：折弯机，激光切割机，喷砂设备，焊接机。 - It is the country's sole professional manufacturer to make wind cycle sandblasting equipment.
是目前国内唯一生产环保型风力循环喷砂设备的专业厂家。 - The Application of CNC Technology in Sandblasting Glass Engraver
计算机数控技术在砂雕玻璃雕刻机中的应用 - Hydrofluoric acid-etching and sandblasting had obvious effect on ceramic surface structure.
氢氟酸及喷砂处理对瓷表面形态改变明显。 - Sandblasting is the most commonly used coarsening process, in sharp sand, hard as well, the use of quartz sand, corundum and so on.
喷砂是最常用的粗化工艺，砂粒以锋利、坚硬为好，可选用石英砂、金刚砂等。 - Sandblasting the surface access to the results of perceptual knowledge, in practice need to continue to accumulate, especially to personally get involved operation, experiment.
喷砂获得表面结果的感性认识，需要在实践中不断积累，特别要亲自动手操作、实验。 - Effect of sandblasting on shear bond strength between rebonded metal brackets and enamel
喷砂处理对脱落托槽与牙面粘结的抗剪切强度 - Spot check of surfaces preservation and protection systems ( sandblasting, painting, cladding, etc).
对产品的表面防护系统（喷沙、喷涂、涂层等）进行抽查。 - Hardware, accessories, refurbished polishing, sandblasting drawing.
五金，配件，翻新抛光，拉丝喷沙。 - Light sandblasting or acid etching may be sufficient but must be completely neutralized before grouting.
轻喷砂或酸蚀可充分，但是在灌浆前必须完全中和。 - Design of a Sandblasting& Coating Workshop with Big-span Moving Grid Roof
某涂装工厂大跨度移动网架屋面的设计 - Manufacturing techniques: mouth blow, machine blow, machine press, artifical carving, golden edge, decal, frosted, sandblasting, etc.
主要有人工吹制、机压、机吹、人工雕刻、描金、烤花、印花、蒙砂等生产工艺。 - Sandblasting machine and ancillary products Shachen separator, industrial vacuum cleaner and efficient filter and dust collector, and so on.
与喷砂机配套产品有砂尘分离器、工业吸尘器、高效过滤器及除尘器等。 - Objective To observe the effect of dental polished surface about extrinsic stain redeposition after ultrasonic scaling and sandblasting respectively.
目的：观察超声洁治及喷砂法去除色素后，牙齿表面抛光对牙外源性色素再沉着的影响。 - Pre-treatment before galvanization and sandblasting to improve adhesive force;
电镀、喷砂前预处理，提高附着里； - We call this piping "spouting spring piping" or "sandblasting piping", if rescue not prompt, the aperture continuously expands, possibly creates serious disaster.
这类管涌，可称为“喷泉管涌”或“喷砂管涌”，如抢救不及时，孔径不断扩大，可能造成严重的灾害。 - The Sandblasting and Coating Survey for the Topside Modulus of Wenchang 13-1/ 2 Platform
文昌13-1/2上部模块建造检验中的喷砂和油漆检验 - EMS observing showed that the enamel layer of this newly developed alumina glass-infiltrated ceramic could be lessened befittingly, the fresh surface therefore exposed and the holes on the surface deepened and widened applying the polishing and sandblasting method.
通过电镜观察，CAD/CAM用玻璃渗透氧化铝陶瓷表面通过打磨和喷砂可以使釉质层适量减少，新鲜陶瓷表面暴露，并使表面孔隙增大、加深。 - Objective: To study the effects of the modified sandblasting surface treatment on the bone implant interfacial shear strength of titanium dental implant.
目的：研究改良喷砂表面处理对钛牙种植体骨界面剪切强度的影响，从界面生物力学角度证实改良喷砂表面处理在钛牙种植体中应用的可行性和应用价值。 - Sandblasting perforation-sand fracturing technology is to aim at tight, high breakdown pressure gas zone with special bore frame.
喷砂射孔&加砂压裂是针对致密、高破裂压力地层或井身结构特殊井的工艺措施； - This paper describes in detail development procedure and working principle of hydraulic sandblasting slotting technology imported from USSR, and introduces its test cases in Daqing oil field.
本文对从俄罗斯引进的水力喷砂割缝技术的发展过程、工作原理及该技术在大庆油田的试验情况做了详细的阐述。 - Conclusions: Sandblasting is a suitable surface treatment for the bonding of the zirconia ceramics.
结论：喷砂处理的氧化锆陶瓷的黏结强度最高，喷砂是适合牙科氧化锆陶瓷黏结的表面处理方法。 - The Maintain Method and Amelioration of the Liquid Sandblasting Machine in Allusion to Most Familiar Failure
液体喷砂机常见故障维修方法和改进 - Wettability of dental alumina ceramic with silica coating is higher than with sandblasting and polishing.
喷砂能够提高氧化铝基陶瓷的润湿性，纳米硅涂层使润湿性进一步增强。 - At present in sand blasting processing, the ceramic sandblasting nozzle is widespread applied.
目前在喷砂处理中，陶瓷喷砂嘴应用较为广泛，其主要失效形式为冲蚀磨损。 - With the theory of gas-solid two-phase flow, computer simulation of sandblasting process was discussed.
运用气固两相流动理论对喷砂过程进行了模拟和仿真。 - There still remains controversy about and whether it is necessary to polishing after sandblasting.
喷砂后是否需要进一步抛光还存在一些争议。 - C/ Ccomposites with different surface morphology and roughness were prepared through different sandblasting technology, and the optimum sandblasting technology was determined based on the shear strength between the HA coating and C/ C substrates.
根据喷砂工艺的不同，制备出不同表面形貌和粗糙度的C/C；并结合对HA涂层的剪切强度性能检测，进一步优化喷砂工艺。 - Finally, the analysis of the specimen sections demonstrates that hydraulic sandblasting perforation can generate cracks on the specimens. The influence of rock characteristics and jet pressure on the cracks is also obtained.
最后对射孔后的试件进行了切片，证明了水力喷砂射孔可以在岩石上产生裂纹，并获得了不同岩性、不同射孔压力在试件上产生裂纹的规律。 - Secondly, sandblasting treatment was performed on the surface of C/ C composite materials by using a small sandblasting equipment used for dental application.
其次，采用小型牙科医用喷砂设备对C/C表面进行了精细化喷砂处理。