slipway

noun

1. （造船或修船的）船台，滑台，滑道
   a sloping track leading down to water, on which ships are built or pulled up out of the water for repairs, or from which they are launched

1. 船台(船只下水用的滑道)
   A slipway is a large platform that slopes down into the sea, from which boats are put into the water.

1. Qualitative analysis of water level at slipway end for ship longitudinal air cells 'launching
   船舶纵向气囊下水工艺船台末端水位定性分析
2. Shipwright has the slipway, wood seasoning stores and manpower needed to build ships for a strong fleet.
   船坞拥有建造大型船舶所必需的船台、木料仓库和足够人力。
3. Difficulties and innovation of technology concerning renovation of mechanized slipway launching facility
   机械化滑道下水设施改造的技术难点和创新
4. Effect of Status Parameters of Slipway and Hull on Motion of Ship Launching
   船台及船体各状态参数对船舶下水运动的影响
5. This paper briefly introduced the key technique in the construction process of big-diameter and super-depth Cast-in-Situ pile for the8000T block slipway of Tanggu basement.
   简要介绍在塘沽基地8000T级组块滑道工程大直径超深灌注桩施工过程中的关键技术。
6. Design of Pumping Station Box-Culvert Outlet Built on Existing Large Slipway and Construction Optimization
   在既有大型船台上建造泵站出水箱涵排放口的设计和施工优化
7. Drydock and slipway dues and costs of shifting the ship shall be allowed in full.
   干坞费、台费和移泊费应全部认入共同海损。
8. Slipway of Guide Tube Frame Structural Design of the Wharf
   拖拉导管架滑道及出运码头结构设计
9. Dynamic analysis of ship launching from a semi-submerged slipway
   半潜式船台船舶下水的动力学分析
10. An Analysis on Sedimentation of Shipyard Slipway in the Middle and Upper Reaches of the Yangtze River
    长江中上游船舶滑道淤积分析
11. Construction of a Slipway with Reinforced Concrete Piles as Foundation
    钢筋混凝土桩基础滑道的施工
12. Brief Introduction of Design and Construction of High-piled Slipway
    高桩滑道工程的设计、施工简介
13. We adopted sliding plate and slipway to move girder body sideways without large tonnage gantry crane, and adopted windlass to drag girder, which was simple and convenient and economy.
    梁体横移不用大吨位龙门吊而采用滑板和滑道，卷扬机拖拉，简便西南交通大学硕士研究生学位论文第11页经济。
14. Dynamic Simulation Experiment of Launching of Ship ′ s Slipway
    船舶滑道下水水力动态模拟试验研究
15. This article discussed the inspected and repaired techniques which combined a underwater engineering practices on the underwater rail of slipway.
    本文结合水下工程实践，探讨了船台滑道水下导轨的检测与修复施工方法。
16. The longitudinal launching of large ships from slipway is a process incorporating complicated technology and numerous accident possibilities.
    万吨级船舶在纵向倾斜船台上下水是一个技术复杂且事故因素较多的工艺过程。
17. The fracture characteristics of bolt connecting the pedestal with slipway in a two-way moving slide valve was analyzed.
    对双动滑阀装置上连接基座与滑道的螺栓在使用过程中发生的断裂进行了分析。
18. Detailed analysis has been made on each work step of the hydraulic system of dynamic slipway, basic circuit of the structure system and performance and characteristics of the hydraulic system.
    对动力滑台液压系统的各工作步骤进行了详细的分析，指出构成系统的各基本回路，重点总结出动力滑台液压系统的性能特点。
19. The paper introduces the jacking up, transverse shifting, and storaging of 24m PC box girder by using jacks, shifting device, winch and reinforced concrete slipway.
    介绍了利用千斤顶、移运器、卷扬机及钢筋混凝土滑道等设备对24m预应力混凝土箱梁进行顶升、横移、存放的施工技术。
20. Based on this slipway arrangement the paper studies and analyzes the longitudinal launching technique for the. 1 718 TEU container ship.
    本文就这一船台布置方案，对1718TEU集装箱船纵向下水进行研究分析。
21. For controlling the quality of friction welding process, a computerized closed-loop control system with electro-hydraulic proportional valves is set up. The axial pressure during friction welding can be controlled in closed-loop. The moving speed of slipway can be proportionally controlled.
    根据摩擦焊接过程质量控制需要，建立了摩擦焊接过程计算机电液比例闭环控制系统，实现了摩擦焊接过程中轴向压力的闭环控制、滑台进给速度的开环比例控制。
22. The bearing capacity and performance of friction and wear of heavy-duty and low-frictional oil-nylon slipway in hydraulic steel gate were studied.
    介绍了水工钢闸门重载低摩油尼龙滑道材料的承载力及其摩擦磨损特征。
23. The Vibration Mechanism and Countermeasure of Instability in Low Velocity in Hydraulic Slipway
    液压滑台低速不稳定性机理与控制的研究
24. The advantages and disadvantages of several types of caisson precasting, such as dock-type precasting, caisson platform precasting, sloping slipway precasting, etc.
    介绍预制沉箱的几种形式，如坞式预制、沉箱台座预制、斜坡滑道预制等的优缺点，重点介绍比较常用的沉箱预制台座的各种不同形式。
25. After analyzing the shortage of traditional method of time-resource optimization, this paper applies ( software P3) to the hull-block slipway assembling project. It is proved that the software is more flexible on time-resource ( optimization).
    分析传统工期-资源优化方法的不足，提出应用P3软件进行资源优化，将其运用到船台大合拢分段吊装计划管理中，证实了该软件在资源优化方法上具有一定的多样性和灵活性。
26. In design apply line-glide rail and ball bearing bar forming slipway structure, scheme out flexible replaceable clamp structure.
    采用直线滑动导轨和滚珠丝杠构成稳定的滑台结构，设计出了更换灵活的夹具结构。
27. To a given ship type, friction coefficient, tide height, and the position on the slipway, the launching force should be calculated and the square equation should be solved according to the calculation method established.
    按所确定的计算方法，对给定船型、摩擦系数、潮位及船舶在滑道上的位置，进行下水外力计算和方程求解。
28. The Problem of Temporary Sealing of the Underwater Reinforced Concrete Caisson for Half-dock-type Slipway
    关于半坞式船台水下钢筋混凝土沉箱的临时止水问题
29. It decreases the self-weight of the slipway and the height of falling girder with the cast steel replacing the armor plate.
    以铸钢格构取代钢板加工式滑道，减少了滑道自重、降低了落梁高度；
30. At present, up to slipway longitudinally is widely used in the large or middle shipyards. There are accidents that the ship bottom structure and slipway are damaged during the process of up to slipway all over the world.
    目前船舶纵向上排是大、中型船厂广泛采用的一种上排方式，但在国内和国外的船舶上排过程中船底和船台结构时有受损的事故发生。

noun

1. structure consisting of a sloping way down to the water from the place where ships are built or repaired

   Synonym:    waysshipway