sprocket

英 [ˈsprɒkɪt] 美 [ˈsprɑːkɪt]

n.  链轮; 输片齿轮; 链轮齿; 链齿

复数:sprockets

机械

COCA.28770



牛津词典

noun

  1. 链轮;输片齿轮
    a wheel with a row of teeth around the edge that connect with the holes of a bicycle chain or with holes in a film, etc. in order to turn it
    1. 链轮齿;链齿
      one of the teeth on such a wheel

      柯林斯词典

      1. 链轮;(胶片的)输片齿轮;(磁带的)带齿卷盘
        A sprocket is a wheel with teeth around the outer edge that fit into the holes in a chain or a length of film or tape in order to move it round.

        双语例句

        1. Remove timing chain with intermediate shaft sprocket.
          拆下带中间轴链轮的正时链条。
        2. The sprocket gear and the rotary plate are respectively fixed on both ends of the connecting sleeve.
          链轮、连接套和旋转板的中心孔依次安装于轴上。
        3. Tighten central screws on the sprocket and camshaft controller to the prescribed final torque using a torque angle wrench.
          用扭力角度扳手将链轮和凸轮轴控制器上的中央螺钉拧紧至规定的最终力矩。
        4. The sprocket must still turn on the balance shaft and must not tilt.
          链轮必须仍能在平衡轴上转动,而且不能倾斜。
        5. Remove camshaft sprocket and chain tensioner.
          拆下凸轮轴链轮和链条张紧器。
        6. Put on chain between crankshaft drive sprocket and intermediate shaft drive sprocket.
          安装曲轴传动链轮和中间轴传动链轮之间的链条。
        7. Mount the chain sprocket of the exhaust camshaft.
          安装排气凸轮轴的链轮。
        8. The bottom of the small sprocket ③ rotation axis, until the chain sprocket bite was.
          ③转动下端链轮小轴,直到链条被链轮咬合。
        9. A sprocket ( 212) includes a hub and a plurality of teeth projecting radially outwardly from the hub.
          一个链轮(212)包括一个轮毂和多个从轮毂径向向外突出的齿。
        10. It drives the camshaft roller-type chain and the oil pump via a sprocket.
          它通过链轮驱动凸轮轴滚柱型链条和机油泵。
        11. Check the clutch position on the exhaust sprocket.
          检查离合器在排气链轮上的位置。
        12. Mount the guide rail between the sprocket wheels.
          在链轮之间安装导轨。
        13. It consists of the chain, the drive sprocket and the driven sprocket.
          它是由链条和主、从动链轮所组成。
        14. Check that the friction plate is fitted in the sprocket.
          检查链轮中是否安装有摩擦片。
        15. The balance shaft has a first end for connection to the drive sprocket and a center bore.
          该平衡轴具有用于连接主动链轮的一个第一端和一个中心孔。
        16. Besides while uses special become shape cutting tool time, still can process sprocket or ratchet wheel.
          此外当使用特殊成形刀具时,尚能加工链轮或棘轮等。
        17. Oil pump drive chain sprocket is pressed onto the front of the crankshaft.
          油泵驱动链轮上按下了曲轴的前面。
        18. It consists of motor, drive mechanism and the drum or sprocket composition, divided into two types of wire rope and chain.
          它由电动机、传动机构和卷筒或链轮组成,分为钢丝绳和环链两种。
        19. The kinematic characteristics of chain drives are analyzed, the relationships between the speed and acceleration of the driven sprocket and the centre distance are given.
          本文从运动学及数学角度对链传动进行了分析,给出了从动链轮速度、加速度与中心距之间的关系。
        20. After seeing your chain and sprocket issues, it doesn't seem like any trouble at all!
          在看到自己的链和链轮的问题,似乎并不像任何麻烦!
        21. Replace the friction plates in the sprocket and on the intake camshaft.
          更换链轮中和进气凸轮轴上的摩擦片。
        22. A driving sprocket for the chain is driven by a driving shaft.
          一用于此链条的驱动链轮由一驱动轴驱动。
        23. Between two or more sprocket with the chain as a flexible draw-off element meshing transmission.
          两个或多于两个链轮之间用链作为挠性拉曳元件的一种啮合传动。
        24. If this is not the case, the outlet camshaft must be re-aligned once again with the sprocket.
          如果与上述情况不符,则必须再次将排气凸轮轴与链轮重新对齐。
        25. Press off small tensioning rail on chain using a screwdriver, insert sprocket and fit it on the pump.
          将链条上的小张紧轨用螺丝刀压开,插入链轮并将其安装到泵上。
        26. Lay the control chain on the mounting tab for the chain sprocket.
          将控制链条放置在链条链轮的安装标记上。
        27. Always replace all fastening screws for the sprocket wheels.
          所有链轮的紧固螺钉需经常更换。
        28. Remove drive plate and sprocket wheel.
          拆下传动盘和链轮。
        29. I walked over to them and told them that my chain and sprocket had given out.
          我走过去给他们,并告诉他们,我的链和链轮已经给出了。
        30. The involute generative hob can also manufacture of arc gear, cycloid gear and sprocket, etc.
          非渐开线展成滚刀还可加工圆弧齿轮、摆线齿轮和链轮等。

        英英释义

        noun

        1. tooth on the rim of gear wheel

            Synonym:    cog

          1. thin wheel with teeth that engage with a chain

              Synonym:    sprocket wheel

            1. roller that has teeth on the rims to pull film or paper through