It also has significant capacity to convert supercooled LNG back into gas. 合并后公司还具备将超冷液化天然气重新转换为天然气的巨大产能。
Glass and pitch behave like supercooled liquids of very high viscosity. 玻璃和沥青的行为很像具有极高粘滞性的过冷液体。
It is shown that the rapid viscous flow deformation, forming, welding can be carried out in the supercooled liquid region. 利用储能和快速释放的方法,研究了锆基块体非晶材料在过冷液相区的快速粘滞流动。
The better performance should be ascribed to the design of supplying supercooled fog and the improvement of ice crystals collecting method. 这一结果是由于改进了提供过冷雾的设计和冰晶接取方法得到的。
The supercooled austenite transforms into friable martensite layer during the following rapid cooling process, leading to cracking and spalling at wheel tread. 过冷奥氏体高速冷却,几乎全部形成脆硬的马氏体薄层,造成踏面剥离。
To raise the freezing temperature of supercooled water in encapsulated ice storage requires some additives into the water. 在封装式蓄冰技术中,为提高过冷水开始结冰的温度,需向水中加入合适的成核添加剂。
Two dimensional images show that graupel is the main ice particles in the cold layer, which implies that supercooled water is adequate; 二维图像表明,冷层中的固态粒子主要是形状不规则的霰粒子,说明过冷水供应充足;
In the past, inflexible 20-year contracts for the supercooled gas, which is carried in vast, insulated tanks, were the norm. 在过去,标准合同是灵活性较差的20年期合同,LNG这种超冷的气体是用大容量绝缘罐运输的。
Deformation behavior of spray-deposited La-based bulk amorphous alloy in supercooled liquid region 喷射成形大尺寸镧基块体非晶过冷液相区内的塑性变形行为
Analyses the influence factors of the system stable running, supercooled water formation and ice generating effect, and gives explanations on their mechanism. 在自主开发的过冷水制冰试验台上,对不同蒸发温度和水流量下的运行情况进行了分组试验。
The forming techniques, evaluation systems and FEM application of bulk amorphous alloys in supercooled liquid region are summarized in this paper. 综述了大块非晶合金在过冷液相区微塑性成形的工艺、成形性能评价及有限元技术应用方面的研究进展。
The isothermal compression behaviors of MgCu-Y7Nd bulk amorphous alloy nearby the glass transition temperature ( Tg) and at temperature in the supercooled liquid region are observed. 研究了MgCuY7Nd大块非晶合金在玻璃转化温度Tg附近及深过冷液相区的等温压缩变形行为。
The Amorphous Chang in Rapid Freezing and in Supercooled of Melt Alloys; We should learn to keep a level head in an emergency. 熔态合金急冷非晶化转变与深过冷非晶化转变在紧急情况,我们应学会保持头脑冷静。
Macro and micro physics conditions of supercooled fog dissipation operation using liquid Nitrogen with that of the cold cloud seeding are compared. 对用液氮消过冷雾和冷云催化增雨作业的宏、微观条件进行比较,找出其异同点。
Study on the measure of reducing condensate's supercooled degree 减少凝结水过冷度措施的研究
In the end, prospects of the dynamic ice-making technique by supercooled water were shown by analyzing its principles. 最后,通过分析过冷水动态制冰的原理,展示了过冷水动态制冰技术的应用前景。
Superplastic behaviors of bulk amorphous alloys in the supercooled liquid region were reviewed. 对大块非晶合金在过冷液相区内的超塑性变形特点进行了评述。
Preliminary studies on the initial ice crystals in supercooled cloud tunnel 过冷云风洞中初始冰晶的初步研究
A Study of the Growth Habits of Ice Crystals in a Low Supercooled HPLC-6 Solution 在低过冷度HPLC-6溶液中冰晶生长习性的研究
The investigation on mechanisms of nucleation in supercooled water fog triggered by supersonic airflow 超声速气流触发过冷水雾核化的机制研究
The experimental investigation on mechanisms of nucleation of ice crystals in supercooled water fog triggered by supersonic airflow is carried out. Various parameters of airflow which influence the generation of ice crystals have been measured carefully. 本文对超声速气流触发过冷水雾核化的机制进行了实验研究,对影响冰晶产生的各种气流参数进行了细致测量。
The dependence of the probability of the supercooled water freezing from homogeneous nucleation on the volume, time and temperature was deduced based on the continuum model of water structure put forward by Stanley and Teixeira. The homogeneous nucleation rate of supercooled water freezing was then calculated. 从Stanley和Teixeira提出的水的微观结构连续模型出发推导了过冷水均质形核结冰概率与过冷水体积、时间和温度的关系,计算了过冷水均质形核率。
The technology and mechanism of Amorphous Chang in Rapid Freezing and in Supercooled are compared. 比较了合金的急冷非晶化转变与深过冷非晶化转变技术及机理。
Then, a supersonic air flow generator for triggering ice crystals generation in supercooled fog is designed. 然后设计了超声速气流发生装置并在过冷雾中进行触发冰晶产生的实验。
With the help of the crystalline process of supercooled melt TNT method ( hot-water suspension) and thermodynamic law, the effect of temperature and mixing speed on the crystalline process is analyzed and the process conditions are defined. 采用TNT熔融过冷法(热水悬浮)结晶工艺,运用热力学原理分析了温度和搅拌速度对结晶过程的影响,通过试验确定了相应的工艺条件。
Amorphous alloy has special properties in mechanics, electrics and magnetic, and its superplastic flow behavior in the supercooled liquid region, fits the miniature process requirements. 非晶合金在力学、电学和磁性能方面有着独特的性能,而在过冷液相区内的超塑性粘性流动行为,恰好适应了微型化的加工要求。
In high-altitude clouds, supercooled water droplets are widespread. 在高空云层中,广泛存在过冷水滴。
This paper researched the superheated steam critical flow and supercooled water cavitation flow in the nuclear safety relief valve by the CFD software, CFX. The results are useful for the structure design and optimization of safety relief valves. 本文使用计算流体力学软件CFx研究核电安全阀内的过热蒸汽临界流和过冷水气穴流,所得到的结论对核电安全阀结构设计和优化具有借鉴意义。
It indicates that the cluster stability in liquids is the controlled key to influence the fragility of supercooled liquids. 这反映了液体中团簇的稳定性是影响液体脆性大小的决定性因素。